Home » Flash File » Vivo » Vivo Y11 PD1930F Flash File Firmware (Stock ROM)

Vivo Y11 PD1930F Flash File Firmware (Stock ROM)

Download Vivo Y11 PD1930F Flash File, Stock ROM, Firmware ROM. this Vivo Firmware file is an official original file and is in MBN extension. And the file contains a USB driver and Vivo flash tool. which describes how to flash and USB driver from Qfil FlashTool. Here is how to flash the Vivo Mobiles with a flash file, which is given below in full detail. How to Flash Manual.

Vivo Y11 Firmware

Read More: Download All Mobile Flash File (Firmware File)

Vivo Y11 Flash Tool
Vivo Y11 Flash Tool

How to Flash Vivo Y11

Download Vivo Y11 PD1930F Flash File and Install Qualcomm Driver, Charge the phone 30% before flashing.

  1. First download all the files above
  2. Extract All File From Zip File.
  3. Install QPST Tool and Run Qfil.exe File
  4. Select the flat build option after the tool is open
  5. After that click on the select programmer’s path to browse and select the file “prog_emmc_firehose_8xxx.mbn”.
  6. Then click on load.xml and select the “rawprogram0” file.
  7. Then select the file patch0.
  8. After selecting all the files with the flash tool, the phone has to be connected to the tool
  9. For that, turn off the phone and press the Volume Up and Volume Down buttons simultaneously.
  10. And then connect the data cable with the phone
  11. After connecting, click on the select port in the tool and select Qualcomm HS-USB QDLoader 9008
  12. Then click on the download button. And wait till flashing.

Note: During flashing, do not remove the data cable from the phone, otherwise the phone can go into a dead mode.

Leave a Reply

Your email address will not be published. Required fields are marked *