Home » Flash File » Ivoomi » Download All Models Ivoomi Flash File (Stock ROM)

Download All Models Ivoomi Flash File (Stock ROM)

Download All Models Ivoomi Flash File, Stock ROM, Official Firmware File. Here the firmware or flash file ROM of all models of Ivoomi is available. And the drivers and Flashtools of all are also given. With which you can easily flash any models of Ivoomi.Below is how to flash Ivoomi, install the driver. Which is easily shown. All the links given below are direct download links, you can easily download all files without any password.

Ivoomi Flash File

Download All Models Ivoomi Flash File

Model No.Downlod Links
Ivoomi Z1Download
Ivoomi ME 4Download
Ivoomi ME 3Download
Ivoomi ME 3SDownload
Ivoomi ME 2Download
Ivoomi ME 1Download
Ivoomi IV505Download
Ivoomi Innelo 1Download
Ivoomi i2Download
Ivoomi i2 LiteDownload
Ivoomi i1Download
Ivoomi i1sDownload

Read More: Download All Mobile Flash File (Firmware ROM)

How to Flash Ivoomi MTK Cpu Models:

Download Ivoomi Flash File and Install Mediatek Driver, Charge the phone 30% before flashing.

1 – First download all the files above
2 – Extract All File From Zip File.
3 – Open the FlashTool folder and run flashtool.exe.
4 – After that open, the tool, click on choose in the download agent tab.
5 – And select the MTK_AllInOne_DA.bin file from the FlashTool folder.
6 – After that click on choose in the scatter-loading file tab and select the scatter file from the flash file folder.
7 – Then click on the download button
8 – Then switch off the phone to connect the phone to Flashtool.
9 – According to the boot mood of the phone, press the button and connect the data cable with the phone.
10 – after which the flashing will start.
11 – The option of the green tick will come after flashing is complete.

How to Flash Ivoomi Models From PAC File:

Download Ivoomi Flash File and Install Driver, Charge the phone 30% before flashing.

1 – First of all download the above files.
2 – Extract All File From zipping Or Rar File.
4 – Open the FlashTool folder and run UpgradeDownload.exe File
5 – After that click on the load packet button and select a PAC file from the given flash file folder.
6 – Wait for some time till the file is loaded
7 – Then click on the download button
8 – To connect the phone to the tool, put the phone in download mode.
9 – Switch off the phone and press the volume up and down simultaneously and Plugin Data Cable.
10- Flashing will start waiting until flashing occurs.
11- During flashing the data cable may not go out of the phone or the phone can go into the dead mode.

Note: During flashing, do not remove the data cable from the phone, otherwise the phone can go into a dead mode.

Leave a Reply

Your email address will not be published. Required fields are marked *