Download the latest version of Xiaomi Poco F1 Flash File stock ROM. The latest MIUI 12 Firmware file of Redmi has been made available on this page, provided by the Xiaomi company. The given flash file is in the MBN extension from which you can flash the Redmi phone in Fastboot mode or EDL mode with the help of the Mi flash tool or with the help of any other Qualcomm tool.
- Mi Flash tool
Poco F1 Model Number: M1805E10A
Before flash, if the device is locked or the phone is locked from the MI account, then it will require MI Authentication Login ID or unlock the bootloader.
How To Flash Poco F1:
- Download Xiaomi Poco F1 Flash File and Install Driver Before Flashing.
- Install the given Xiaomi flash tool, the USB driver of the phone is included in the flash tool
- Then extract the flash file from the zip file.
- Extract from the zip file after 7zip setup again.
- After that Install 7zip Software to Extract Flash File. (7zip Link)
- After that Run the Xiaomiflash.exe From Desktop and select flash in it
- After that click on the option of the above selection in the tool and select the “image” folder in the folder where your flash files are.
- If you are flashing in Fastboot mode, select the “firmware” folder.
- After selecting the firmware, connect the phone to the computer.
- To get the phone into the EDL model, find and jumper the EDL point, and connect the data cable with the phone.
- After that select “Clean All” in the option given below and click the Refresh button which will show the com port in the tool.
- After that click on the flash button, the flash will start.
Note: During flashing, do not remove the data cable from the phone, otherwise the phone can go into a dead mode.