Home / Tecno / Tecno Pop 5 LTE Flash File BD4i Firmware Latest 2022

Tecno Pop 5 LTE Flash File BD4i Firmware Latest 2022

Download Tecno Pop 5 LTE Flash File From Here. The given firmware file of Tecno BD4i is the original file and it is in the scatter file, which describes how to flash and driver Install from the SP Flash tool. Here is how to Flash Tecno Phone with a Scatter file, which is given below in full detail. How to Flash Manual.

Model NameBD4i
OSAndroid 11, HIOS 7.6
ChipsetMediaTek
EDL PointVolume Up

How to Flash Tecno Pop 5 LTE BD4i:

  1. First, Download Tecno Pop 5 LTE Flash File BD4i and Install Mediatek Driver.
  2. Extract All File From Zip File.
  3. Open the FlashTool folder and run flashtool.exe.
  4. After that open, the tool, click on choose in the download agent tab.
  5. And select the MTK_AllInOne_DA.bin file from the FlashTool folder.
  6. After that click on choose in the scatter-loading file tab and select the scatter file from the flash file folder.
  7. Then click on the download button
  8. Then switch off the phone to connect the phone to Flashtool.
  9. According to the boot mood of the phone, press the button and connect the data cable with the phone.
  10. The option of the green tick will come after flashing is complete.

Note: During flashing, do not remove the data cable from the phone, otherwise the phone can go into dead mode.

If your phone is in dead mode, the logo hangs, or the phone is locked, after flashing from this file all the problems will be fixed simultaneously and if you are locked with FRP then flashing will unlock it.

Leave a Comment