Download Tecno DP10A Flash File, Stock ROM, Official Firmware ROM. The given firmware file of Tecno is the original file and it is in the scatter file, which describes how to flash and driver Install from Tecno FlashTool. Here is how to Flash Tecno Mobiles with a Scatter file, which is given below in full detail. How to Flash Manual.
If your phone is in dead mode, the logo hangs, or the phone is locked, after flashing from this file all the problems will be fixed simultaneously and if you are locked with FRP then flashing will unlock it.
How to Flash Tecno DP10A:
Download Tecno DP10A Flash File and Install Mediatek Driver. Charge the phone 30% before flashing.
- First download all the files above
- Extract All File From Zip File.
- Run SWD_AfterSales.exe from Flashtool folder
- Click on the settings button.
- Then click on load
- Select the scatter file from your flash file folder.
- select Format or Firmware Upgrade.
- After that click on confirm and press play button
- After selecting the file, connect the phone to your computer.
- To connect the phone to the computer, press the volume up and down simultaneously and attach the data cable
Note: During flashing, do not remove the data cable from the phone, otherwise the phone can go into a dead mode.