Home / Micromax / Micromax P500 Flash File (Stock ROM)

Micromax P500 Flash File (Stock ROM)

Download Micromax P500 Flash File, Stock ROM. The given firmware file of Micromax is the official original file and it is in the IMG file, which describes how to flash and driver Install from LivesuitPack Tool. Here is how to Flash Micromax Phone with a Scatter file, which is given below in full detail. How to Flash Manual.

How to Flash Micromax P500:

Download Micromax P500 Flash File and Install Mediatek Driver, Charge the phone 30% before flashing.

  1. Download the file above and extract it from the zip file
  2. Then open the folder containing flash tool
  3. After run Livesuit.exe
  4. Then click on the select image. And select the image file from your firmware folder
  5. After selecting the file, click on the system upgrade option
  6. To flash or upgrade the phone, you will have to download mode
  7. To connect the phone to the tool, hold the volume up and down simultaneously and Plugin data cable.
  8. After that flushing will start

Note: During flashing, do not remove the data cable from the phone, otherwise the phone can go into a dead mode.

If your phone is in dead mode, logo hangs, or the phone is locked, after flashing from this file all the problems will be fixed simultaneously and if you are locked with FRP then flashing will unlock it.

Leave a Comment