Download Intex Aqua R2 Flash File, Stock ROM. The given firmware file of Intex Mobile the official original file and it is in the Bin file, which describes how to flash and driver Install from RDA FlashTool. Here is how to Flash Intex Phones with a Scatter file, which is given below in full detail. How to Flash Manual.
How to Flash Intex Aqua R2
Download Intex Aqua R2 Flash File, and Install RDA Driver, Charge the phone 30% before flashing.
- First download all the files above
- Extract All File From Zip File.
- Open the FlashTool folder and run Multi_IEdownload_eng.exe
- After that open, the tool, click on choose in the Browse tab.
- After that Select RDA bin Flash File
- Then click on the Start All button
- Then switch off the phone to connect.
- According to the boot mood of the phone, press the button and connect the data cable with the phone.
- It will take some time for flushing then wait till the flash
Note: During flashing, do not remove the data cable from the phone, otherwise the phone can go into a dead mode.
If your phone is in dead mode, the logo hangs, or the phone is locked, after flashing from this file all the problems will be fixed simultaneously and if you are locked with FRP then flashing will unlock it.