Home / Infinix / Infinix PR652C Flash File (Stock ROM)

Infinix PR652C Flash File (Stock ROM)

Download Infinix PR652C Flash File. Official Latest Version Firmware File, Stock ROM. This flash file of Infinix Mobile is in the PAC extension, which describes how to flash and drive from SPD UpgradeDownload FlashTool. Here is how to flash Infinix Phone with a flash file, which is given below in full detail.

File Name:PR652C-F6319-11.0-OP-V017-20210805
File Size2.04GB
Flash ToolSPD UpgradeDownload Tool
DriverSPD Auto Installer Driver
Firmware LinkDownload

If your phone is in dead mode, the logo hangs, or the phone is locked, after flashing from this file all the problems will be fixed simultaneously and if you are locked with FRP then flashing will unlock it.

How to Flash Infinix PR652C:

Download Infinix PR652C Flash File and Install Driver, Charge the phone 30% before flashing.

  1. First of all download the above files.
  2. Extract All File From zipping Or Rar File.
  3. Open the FlashTool folder and run UpgradeDownload.exe File
  4. After that click on the load packet button and select a PAC file from the given flash file folder.
  5. Wait for some time till the file is loaded
  6. Then click on the download button
  7. To connect the phone to the tool, put the phone in download mode.
  8. Switch off the phone and press the volume up and down simultaneously and Plugin Data Cable.
  9. Flashing will start waiting until flashing occurs.
  10. During flashing the data cable may not go out of the phone or the phone can go into the dead mode.

Note: During flashing, do not remove the data cable from the phone, otherwise the phone can go into dead mode.

Leave a Comment