Innjoo Flash File Firmware For All Model (Stock ROM)

Download Innjoo Flash File Firmware For All Model, Stock ROM, Official Firmware ROM. The given firmware file of Innjoo is the original file and is in the scatter file, which describes how to flash and driver Install from SP FlashTool. Here is how to Flash Injoo Phone with a Scatter file, which is given below in full detail. How to Flash Manual

Innjoo Firmware List For All Model

Innjoo ModelFile Links
InnJoo X2Download
Innjoo T1Download
InnJoo SparkDownload
InnJoo Pro LTEDownload
Innjoo ONE LTE HDDownload
Innjoo One 3G HDDownload
Innjoo NoteDownload
Innjoo Note ProDownload
Innjoo Note EDownload
InnJoo MaxDownload
InnJoo Max 3 Pro LTEDownload
InnJoo Max 3 LTEDownload
InnJoo Max 3 3GDownload
InnJoo Max 2 Plus 3GDownload
Innjoo Max 2Download
InnJoo i3Download
Innjoo i2sDownload
Innjoo i2Download
Innjoo i1sDownload
Innjoo i1kDownload
Innjoo i1Download
Innjoo HaloDownload
InnJoo Halo PlusDownload
Innjoo Halo LTEDownload
InnJoo Halo 2 3GDownload
Innjoo FireDownload
Innjoo Fire ProDownload
Innjoo Fire Plus LTEDownload
Innjoo Fire Plus 3GDownload
Innjoo Fire 3 LTEDownload
Innjoo Fire 3 Air LTEDownload
Innjoo Fire 2 Plus LTEDownload
InnJoo Fire 2 LTEDownload
Innjoo Fire 2 3GDownload
Innjoo F104Download
InnJoo F5Download
InnJoo F3Download
Innjoo F2Download
Innjoo F1 NoteDownload
InnJoo 4Download
InnJoo 3Download
InnJoo 2 LTEDownload
InnJoo 2Download
Innjoo Halo XDownload
InnJoo 5Download

How to Flash InnJoo Phone

Download InnJoo Flash File and Install Mediatek Driver, Charge the phone 30% before flashing.

  1. First download all the files above
  2. Extract All File From Zip File.
  3. Open the FlashTool folder and run flashtool.exe.
  4. After that open, the tool, click on choose in the download agent tab.
  5. And select the MTK_AllInOne_DA.bin file from the FlashTool folder.
  6. After that click on choose in the scatter-loading file tab and select the scatter file from the flash file folder.
  7. Then click on the download button
  8. Then switch off the phone to connect the phone to Flashtool.
  9. According to the boot mood of the phone, press the button and connect the data cable with the phone.
  10. The option of the green tick will come after flashing is complete.

Note: During flashing, do not remove the data cable from the phone, otherwise the phone can go into a dead mode.

error: Content is protected !!