Download Comio M3 Flash File, Stock ROM. Official Latest Version Firmware File. This flash file is in the BC extension, which describes how to flash and driver from Broadcom MultiDownloader FlashTool. Here is how to flash Comio Phone with a flash file, which is given below in full detail. How to Flash Manual.
How to Flash Comio M3:
Download Comio M3 Flash File and Install Driver, Charge the phone 30% before flushing.
- First download all the files above
- Extract All File From Zip File.
- Open the FlashTool folder and run MultiDownloader.exe
- After Broadcom Multidonloader is launched, click on the Settings button.
- After that click on the Configuration button and click on […]
- After that select the location of the firmware file folder. The flash file will be selected.
- Then click on the apply button and Click On Start all.
- Then switch off the phone to connect the phone from the tool.
- Then connect the data cable with the phone by pressing the volume up and down simultaneously.
- The flashing start will start in any of the numbers Dig1 to Dig9.
Note: During flashing, do not remove the data cable from the phone, otherwise the phone can go into dead mode.