Download All Comio Models Flash File, Stock ROM, Official Firmware File. Here the firmware or flash file ROM of all models of Comio is available. And the drivers and Flashtools of all are also given. With which you can easily flash any models of Comio.Below is how to flash COMIO, install the driver. Which is easily shown. All the links given below are direct download links, you can easily download all files without any password.
Download All Models Comio Firmware File
| Comio Models | Download Links |
|---|---|
| Comio P1 | Download |
| Comio A2 | Download |
| Comio A4 | Download |
| Comio A4G | Download |
| Comio A5 Plus | Download |
| Comio A6 Plus | Download |
| Comio A6 | Download |
| Comio A5D | Download |
| Comio A5C | Download |
| Comio A6G | Download |
| Comio A7 | Download |
| Comio V9 Plus | Download |
| Comio V9 | Download |
| Comio P320G | Download |
| Comio P305 | Download |
| Comio P350C | Download |
| Comio P305Q | Download |
| Comio P321G | Download |
| Comio P321Q | Download |
| Comio C3 | Download |
| Comio X1 | Download |
| Comio X1 Note | Download |
| Comio C2 | Download |
| Comio S1 | Download |
| Comio S1 Lite | Download |
| Comio C2 Lite | Download |
| Comio M3 | Download |
Read More: Download All Mobile Flash File (Firmware ROM)
How to Flash Comio Models From CPM File:
Download Comio P1 Flash File and Install Driver, Charge the phone 30% before flashing.
1 – First download all the files above
2 – Extract All File From Zip File.
3 – Install FlashTool and open the FlashTool folder.
4 – Open ygdp.exe File.
5 – Password must be entered after tool open [369 or 9527]
6 – Then click on the login button
7 – After opening the tool click on the Config tab.
8 – After that CPM file Select.
9 – Now click on Apply Button
10 – Then Click On Start Tab Button.
11- Then connect the phone to the tool.
12- To put the phone into download mode press the Volume Up and Down Button simultaneously and plugin cable.
Note: During flashing, do not remove the data cable from the phone, otherwise the phone can go into a dead mode.
How to Flash Comio Models From PAC File:
Download Comio A2 Flash File and Install Driver, Charge the phone 30% before flashing.
1 – First of all download the above files.
2 – Extract All File From zipping Or Rar File.
4 – Open the FlashTool folder and run UpgradeDownload.exe File
5 – After that click on the load packet button and select a PAC file from the given flash file folder.
6 – Wait for some time till the file is loaded
7 – Then click on the download button
8 – To connect the phone to the tool, put the phone in download mode.
9 – Switch off the phone and press the volume up and down simultaneously and Plugin Data Cable.
10- Flashing will start waiting until flashing occurs.
11- During flashing the data cable may not go out of the phone or the phone can go into the dead mode.
